Polymer80 PF940C Jig Kit for PF940C Frame Blanks

The polymer80 pf940c jig kit for pf940c frame blanks is the essential tooling package required to complete a PF940C Compact frame build. Designed exclusively for Polymer80 PF940C frame blanks, this jig kit provides the precise alignment blocks, drill bits, and hardware necessary for a clean, accurate completion process. This kit includes everything needed to finish the frame pocket, pin holes, and trigger housing channel on your PF940C blank. It is a standalone component kit; frame blank sold separately.

Overview

This jig kit is the official completion fixture for the Polymer80 PF940C Compact frame. It contains the three-piece jig system that secures your frame blank during the machining steps, along with the correct diameter drill bits and end mill for the pocket and pin locations. The kit is built to the same tolerances as the original PF940C production fixtures, ensuring that your completed frame will accept standard compact-size slide and lower parts kits. The jig is reusable and can be used for multiple builds when paired with new frame blanks.

Features & Specs

• Includes three-piece polymer jig, drill bits, end mill, alignment pins, and spring-loaded punch
• Compatible exclusively with Polymer80 PF940C Compact frame blanks (not for use with PF940V2 or PF9SS frames)
• Drill bits and end mill are pre-sized for correct pin hole diameter and trigger pocket depth
• Jig body uses captive alignment pins to prevent frame movement during drilling
• Manufacturer: Polymer80 | Category: Frames

The polymer80 pf940c jig kit for pf940c frame blanks uses a three-stage machining process: trigger housing pocket, trigger pin hole, and front/rear locking block pins. Each stage has dedicated alignment blocks machined into the jig body. The included end mill clears the pocket to factory depth, while the drill bits create the exact diameter holes for standard FCG pins. The spring-loaded punch assists with removing the frame from the jig after completion. The kit does not include a frame blank, lower parts kit, or slide assembly.

Who It’s For

This jig kit is for the individual who owns a Polymer80 PF940C Compact frame blank and requires the correct tooling to complete it. It is intended for home builders, hobbyists, and gunsmiths who prefer to finish their own frames using hand tools or a drill press. The kit is not for commercial manufacturing or high-volume production environments. Users should have basic familiarity with drilling and reaming techniques. This product is for personal use only and is not intended for resale as a completed firearm frame without appropriate federal licensing. The polymer80 pf940c jig kit for pf940c frame blanks is the only jig kit that matches the PF940C frame geometry exactly.

Shipping & FFL

This jig kit ships directly to your residential or business address. No FFL transfer is required for this item because it is a tooling kit and does not contain a firearm frame, receiver, or any component regulated as a firearm under the Gun Control Act of 1968. However, the completed frame blank that results from using this kit may be subject to federal, state, and local laws regarding firearm manufacturing. You are solely responsible for understanding and complying with all applicable laws in your jurisdiction before purchasing or using this product. By purchasing this polymer80 pf940c jig kit for pf940c frame blanks, you acknowledge that you will only use it in compliance with all federal, state, and local regulations.